Guide · 4 min read · Updated October 10, 2026
Mobile Home Skirting Cost: Types, Prices, and What to Pick Before Winter
What mobile home skirting costs in 2026, how the main types compare, the vent rules your skirting has to meet, and when to DIY.
The short answer
Mobile home skirting costs about $2,400 on average, with most projects between $1,500 and $5,000, according to Angi's 2026 cost guide. Plain vinyl is the cheapest type, while insulated vinyl and timber cost the most. Whatever you pick, federal installation rules require vents and an access opening so the space under the home can breathe and be reached.
Skirting is the wall of panels around the bottom of a mobile home. It hides the piers and plumbing, but its real job is protection: it blocks wind, keeps animals out, and helps keep the water lines under the floor from freezing. If yours is missing panels or never got finished, fall is the time to fix it.
How much does mobile home skirting cost?
Mobile home skirting costs about $2,400 on average, with most projects between $1,500 and $5,000 and a full range of $500 to $7,700, according to Angi's 2026 skirting cost guide.
Panels average $6 to $8 per linear foot, and a standard single-wide needs about 150 linear feet, so panels alone run about $900 to $1,200 for a single-wide. Angi says labor makes up about 60% of the budget, at $60 to $125 an hour, and most homes can be done in a day.
Small extras add up too. Angi lists access doors at $50 to $85, foundation vents at $7 to $25 each, and removing old skirting at $200 to $500.
What are the best types of mobile home skirting?
The best mobile home skirting depends on your climate, budget, and how long you plan to stay. Here's the LAND + HOME skirting comparison:
| Type | Single-wide | Double-wide | Insulation | Looks and notes |
|---|---|---|---|---|
| Vinyl | $630–$1,090 | $1,100–$1,550 | None on its own | Cheapest; can fade over time |
| Insulated vinyl | $1,440–$4,000 | $1,760–$4,480 | Yes | Best fit for cold climates |
| Faux stone | $660–$1,000 | $920–$1,350 | None on its own | Stone look in lightweight panels |
| Faux brick | $800–$1,500 | $1,200–$1,980 | None on its own | Brick look in lightweight panels |
| Brick or concrete block | $700–$1,000 | $1,400–$2,000 | None on its own | Solid, permanent look |
| Timber (wood) | $1,500–$2,000 | $3,000–$4,000 | None on its own | Natural look; among the priciest |
| Wood lattice | $500–$700 | $600–$800 | None | Open pattern lets air through; mostly decorative |
| Metal | Not priced | Not priced | None on its own | Easy to remove and reinstall if you move |
Prices are from Angi (2026), except lattice, which comes from HomeGuide's 2024 guide. HomeAdvisor notes metal is easy to take down and put back up, and that insulated vinyl is "particularly valuable in cold climates" (HomeAdvisor). Angi notes that vinyl tends to fade and wear over time.
Quotes vary a lot by area. HomeGuide's installed totals run $1,000 to $2,500 for a single-wide and $2,000 to $4,000 for a double-wide, so get at least two local bids.
Why does skirting matter before winter?
Skirting matters before winter because it keeps cold wind from blowing under the home, where the water lines, heat tape, and belly wrap are. Gaps let in cold air and animals, and animals can nest in the insulation that protects your pipes.
Walk around the home now. Look for loose, cracked, or missing panels, and patch them before the first hard freeze. Our mobile home winterizing guide and how to prevent frozen pipes cover the rest of the under-home check.
Does mobile home skirting need vents?
Yes. HUD's federal installation standards, 24 CFR 3285.505, set the rules when a home has skirting:
- Vent area: at least 1 square foot of net vent area for every 150 square feet of floor area (or 1 per 1,500 if a vapor retarder covers the ground)
- Placement: vents as high as practical, on at least two opposite sides
- Covers: rodent-resistant, corrosion-resistant screens; adjustable in freezing areas
- Access opening: at least 18 inches wide, 24 inches high, and 3 square feet, near the utility connections
- Dryer and combustion vents: must go through the skirting to the outside
Example only: a 14-by-70-foot single-wide has 980 square feet of floor. 980 ÷ 150 = about 6.5 square feet of vent area. With a ground vapor retarder, 980 ÷ 1,500 = about 0.65 square feet. Your state may add its own rules.
Should you install skirting yourself or hire a pro?
You can install vinyl or metal skirting yourself if you're handy, and HomeAdvisor says DIY can save up to 60% on labor. Block, brick, and faux stone take more skill, so many owners hire those out.
Before you buy panels, check two things. Some skirting warranties require professional installation. And if you live in a community, ask the manager for the skirting rules in writing, since many parks set approved materials, colors, and a deadline for finishing it.
The bottom line
Skirting usually costs a few thousand dollars, and it protects your pipes, floor, and wallet every winter. Vinyl is the budget pick, insulated vinyl is the cold-climate pick, and faux stone or block is the looks pick. Leave room for vents and an access door, follow your park's rules, and get local quotes. Prices change by area, so do your research and know your numbers.
Common questions
How much does it cost to skirt a mobile home?
Angi puts the average at about $2,400 in 2026, with most projects between $1,500 and $5,000. Material, home size, and local labor rates decide your number, so get a few quotes.
What is the cheapest mobile home skirting?
Vinyl is usually the cheapest. Angi lists vinyl at $630 to $1,090 for a single-wide and $1,100 to $1,550 for a double-wide.
What is the best skirting for a mobile home in cold weather?
Insulated vinyl is the type HomeAdvisor calls particularly valuable in cold climates, because it adds insulation as well as a wind barrier. It also costs the most of the panel types.
Does mobile home skirting need vents?
Yes. HUD's installation standards (24 CFR 3285.505) require at least 1 square foot of net vent area for every 150 square feet of floor area, with vents on at least two opposite sides, plus an access opening at least 18 by 24 inches.
Can I install mobile home skirting myself?
Many owners do, and HomeAdvisor says DIY can save up to 60% on labor. Check your park rules and your skirting warranty first, since some warranties require professional installation.
When you're ready for the next step
Keep reading
How to Winterize a Mobile Home: A Bottom-Up ChecklistA step-by-step winter checklist for mobile and manufactured homes, from the water lines underneath to the roof, plus what to do if it will sit empty.
Mobile Home Renovation Ideas That Make It Feel Less Like a TrailerBudget-friendly upgrades, inside and out, that make a mobile or manufactured home look and feel more like a house.